Dyeing Machines

Spry Type Hank Dyeing Machine is designed for dyeing of loose fibers / Yarns. The heating to dye is provided and bundle of yarn is half deep and rotated at speed calculated. The rotating shaft also has veins to inject dye inner side of bundle. The machine is most suitable to avoid hazardous manual operations. The Machine can be designed with multiple shafts for higher production.

Features

• High efficient Circulation Pump made of SS316L.
• Mirror polished perforated tubes with dish shaped front and rear disc for hassle free movement of the yarn.
• Rotating hank displacing pipe is fit with Teflon bushes.
• •Inclined roof of special design, hence no dripping on the hanks.
• Manual Ball valves at each tubes inlet.
• AC inverter (optional) to regulate the flow of the liquor to maintain pressure.
• Steam heating coil for quick heating with pneumatic operated valves and steam trap.
• Water level indicator
• Spot light inside the machine for inspection of material.
• Dial pressure gauge to keep the check of the flow.
• Programmer along with Digital temperature indicator
• Fully Auto or Semi-Auto with PLC & Touch Screen & A/C Drive for main pump.

Capacity - 5kg, 10kg, 15kg, 20kg, 25kg, 30kg & 500kg.

Features:

· Uniform dyeing.

· Easy operation Turbo Pump.

· Heating and cooling provision are provided.

· Batch capacity 50gms to 300gms

· Fully automatic.

· Individual programming of every dye pot.

· Assured reproducibility and levelness of dyeing.

· Pot has its own individual and automatic draining.

Capacity- 50 gms to 300 gms

Yarn Dyeing Machine is specially designed for developing samples of fibers / yarns.Capacity of dyeing machine is calculated by the yarn to be dyed.

HTHP Vertical Yarn Dyeing Machine is designed for dyeing of fibers / yarns in production. Capacity of dyeing machine is calculated by the yarn to be dyed. The formula calculated i.e the recipe of the colour which is used to dye the different type of yarns, in Sample Dyeing Machine is used in this H. T. H. P. Vertical Yarn Dyeing Machines. H. T. H. P. Vertical Yarn Dyeing Machines are controlled by programmable controller The Dyeing Vessel available in market are in different forms like Vertical single vessel or Horizontal with no. of small tubes which vary according to the capacity of the yarn to be dyed.

Features

• Reversible TURBO Pump.
• Carriers for cone, hank, tapes etc.
• Air pad or fully flooded versions available
• LC assistance also available
• Very small liquor ratio 1:5 to 1:8
• Energy efficient compact design of heat exchanger
• Open colour tank

Capacity -5kg to 500kg

Infra Beaker Dyeing Machine is designed for dyeing of loose fibers / Yarns / samples in SS pot in very small quantity. It can be substitute for Glycerin Bath Beaker Dyeing Machine (H.T.H.P Beaker Dyeing Machine). As compare to Glycerin bath dyeing machine, Infra Beaker Dyeing Machine avoid the smell of heated Glycerin and heat is directly given to the pot and also measured from pot, so accuracy in process. It is less hazardous and convenient in working.

Infra dyeing machine heating enables efficient heating of beakers resulting in optimum dyeing conditions. as infrared radiations are used for heating there is no contamination of beakers with messy heating medium and hence the working is cleaner. more dyeing cycles are possible with infra colour as preparation and cleaning time is greatly reduced. injection dosing system is provided for making time to time additions to the beakers without opening the beakers.

Variable speed rotation of beaker carriage assembly facilities dyeing of all types of fabric and yarn samples with all classes of dyes.

Automation is through microprocessor programmer.

Infra colour is environment friendly easy to use sample dyeing machine with infra colour there is no pollution, no smoke or bad smell in working area as is the case with conventional baths.

Features

• Crease - and spot -free sample dyeing.
• Low liquor ratio: 1:5 fabric dyeing cotton.
• Soda ash adding without opening the beakers.
• No glycerin or cooling  water needed.
• Optional : Filling in the powder or liquid chemical to be added later on during the dye process.
• Three - dimensional movement and 360° rotation (clockwise and counterclockwise) allow even and dyed through samples.
• The multi functional beaker holder allows the use of different beaker sizes.

Capacity- 15 kg to 540 Kg

Panel Board - Programmable through microprocessor controller DP-02 with 99 program memory.

It is ideal M/C for processing of garments in small quantity. M/C can be used for dyeing as well as finishing purpose and carrying out Bio-polishing of garment & Fabric samples. M/C. has S.S. 316 perforated drum for simulated heating action.